Orion VII EPA10, Руководство оператора

Страница: 27 / 90

Driver’s Side Control Panel
Page 21
must always be activated first.
See “Gear Range Selector
Position” on page 43.
7. Master Switch
This four position rotary switch
enables various electrical
systems under the following
selected positions: ENGINE
STOP, DAY RUN, NIGHT RUN,
or PARK.
See “Master
Switch” on page 25.
8. Driver’s Door Control Push
Buttons
The rear and front door
controller push buttons
provides the operator with
complete control over the front
and rear doors. Press once to
open and press again to close
the doors.
9. Hill Holder Switch
This two position momentary
(ON, OFF) rocker switch
manually activates the brake
interlock circuit to prevent the
vehicle from rolling when on an
inclined surface.
10. PCS Emergency Override
Switch
This rocker switch will override
the HybriDrive™ protection
system. This will allow the
propulsion system to operate
with known faults for as long as
the switch is depressed.
To activate the PCS Emergency
Override switch, release the
locking tab by pushing and
NOTE
When the front or rear door is
opened, the activated button will
remain illuminated until the door
is closed.
NOTE
The throttle will still be active
while the Hill Holder switch is
activated. Releasing the Hill
Holder switch will release the
brake interlocks.
NOTE
Releasing the brake pedal while
the Hill Holder switch is in the
ON position and the doors are
closed, will cause the vehicle to
slowly creep forward.