Orion TC1973D, Руководство по обслуживанию, Страница: 3 / 36

DISASSEMBLY INSTRUCTIONS
Insert one
end of the Anode Support into the anode button.
then the other as shown in Fig.
Fig.
5. Confirm that the Support is securely connected.
6. Put on the Rubber Cap without moving any parts.
2. REMOVAL OF DEFLECTION YOKE
(Refer to
Fig. 2-1)
Loosen the screw
2. Remove the Convergence Purity Magnet in the
direction of (A).
3. Loosen the screw
4. Remove the 3 Wedges.
5. Remove the
Yoke in the direction of
arrow
INSTALLATION
new Deflection Yoke in reverse steps of REMOVAL.
NOTE
After adjusting the purity and the convergence. fix the
screw and lock the wedges.
Wedge
Fig.
5