http://www.orion.ua
4
13. Air outlet cover
14. Floor brush storage clip
15. Floor brush
16. Crevice nozzle
Quick start
1. Assemble the nozzle, the tube and hose.
A
2. Pull out the mains cable to its full length and plug into the mains supply.
3. Switch on by pressing the On/off switch-button.
1
Accessories
Insert the flexible hose
Fit the hose to the cleaner by inserting the hose end into the hose inlet
5
until it clicks to the
position.
To remove the flexible hose
When removing, squeeze the clips up side and pull it out.
Fitting the tubes and accessories
1. Attach the tube to the handle end of the hose.
The hose handle features an airflow regulator
8
which allows suction to be reduced as
required.
2. Attach the floor brush
15
to the tube.
3. Attach the crevice nozzle
16
to the tube.
Turn the rotating nozzle as the arrowhead show; it can be used as the upholstery nozzle (for
curtains and upholstery).
Turn the rotating nozzle backwards to the home position; it can be used as the crevice nozzle
(for awkward places, behind radiator; or for hard surfaces, pelmets, delicate objects etc).
Controls
Power
The on/off control is operated by On/off switch-button.
1
Variable power
A Variable power switch
2
varies the suction power as required .For example, maximum
suction can be used for cleaning carpets, hard floors etc, and reduced suction for cleaning
upholstery and curtains.
Suction can also be controlled using the airflow regulator
8
on the handle .Closed for
maximum suction, open for reduced suction.
Automatic cable rewind
After use, unplug and press the cable rewind button
3
to retract the cable.
WARNING
: When using the cable rewind, always hold the plug as the cable will rewind
quickly.
Dust disposal
To obtain the best result from your cleaner, empty the dust container when the full dust
indicator 3 is light, otherwise the airflow and cleaning power will be reduced.
