8
switch on the vacuum machine, then the machine will work at the max power.
ON/OFF Switch
2. Power Control Button
This vacuum machine is used a remote speed control device on the hose handle to control the power.
You can use buttons on the hose handle to switch off or adjust the suction power of the machine.
z
Standby Button
This button is used to switch between standby mode and operation mode. While the machine is
operating, push this button returns the machine to the standby mode. And push again to re-start the
machine. ( within 10 seconds, the standby button has power memory. Namely, if you re-start the
machine within 10 seconds, the machine will work at the same power as last time.)
z
Suction Power Selection Button
Use (+) or (-) button on the hose handle to adjust the suction power of the machine.
Note:
** If the remote control function is unworkable, please check the battery and change the battery inside the
handle. You can also work the vacuum machine without the remote control function, but power is at max
power level, and can’t adjust the power speed.
3. Auto Cord Rewind Button
To rewind the power cord, press the rewind button with step and it is better to guide the
cable with a hand to ensure that it does not whip causing damage.
