CHARACTERISTICS
Equipped with 4 high precision "strain-Gauge" sensor
LCD Display
Capacity: 150KG
Division: 0.1kg
Auto zero
Auto off
Low power & Overload indication
Power:1 pc Lithium cell(CR2032)
Net/Gross weight: 1,35kg/1,70kg
Unit size : 290x290x20mm
Gift box size: 303x31x303mm
Colour: black
PREPARATIONS BEFORE USE
1. Take out your scale.
2. Insert the battery.
3. After you insert the battery the display will show
. Then the display
will show 0.0. It means that that the scale has been setup correctly.
Note:
Make sure that you have installed battaries correctly. " + “ is up.
SCALE OPERATION
1. Put the scale on a hard surface(avoiding carpets or any soft surface).
2. Switch on the scale with a slight tap on the glass platform near LCD display.
3. Put your feet evenly on the scale without moving and wait whilst the scale
computes weight.
4. After showing the result about 8~12 seconds, the scale will turn off automatically.
Note:
If you step on the platform before “0.0” appears, you will not obtain a reading.
If a weight less than 5kg is placed on the scale, the scale will not activate. To
weigh something less than 5kg, activate the scale first by tapping the front
corner (right or left) of the scale with your foot. Min. weight: 2 kg.
Overload indiacator
When the scale is overloaded the following will appear on the screen: ERR
Battery Change Indicator
When the batteries need replacing the following will appear on the screen: LO
Please open the back board of the scale, and then take the batteries carefully out of
the battery compartment. Dispose of the old batteries in a safe place. Do not place on
fire.
Maintenance
Wipe dry with a clean cloth
Do not use abrasive washing powders, steel wool or scouring pads
Store scale in a cool place
Do not store the scale in an upright position
