www.orion.ua
/
5
BEFORE EACH USE
CHECK HUMIDIFIER PLACEMENT
Place the Humidifier on an elevated non-metallic waterproof surface for best performance. This is to help
disperse the mist in the air, and prevent it from being knocked or tipped over.
CHECK WATER LEVEL SENSOR
Make sure that the water level sensor is secured properly. Refer to “cleaning and maintaining water level
sensor” on page 7 for instructions on how to assemble water level sensor.
CHECK WATER TANK CONTACT SENSOR
Make sure that the Magnetic Sensor is fixed properly. This Contact sensor is usedfor water tank put up
protection..
CHECK FAN VENT
This fan vent is located on the bottom of the humidifier. The purpose of the Fan Vent is to blow the cool mist
through the vapor outlet slots. It is important that this part is kept clean and free of obstructions. We
recommend checking the fan vent before using this item (i.e. lint, paper).
Do not place humidifier on top of a towel, or a carpeted surface. The fan vent on the bottom may become
blocked, and overheat the humidifier.
DIRECTIONS FOR USE
1. Unplug the unit from the wall socket.
2. Unlock the water tank body by turning the lock
counterclockwise.
3. Take out the spout out of the body and place it on
table.
4. Separate the tank from the body of the unit by
holding the handle
5. Open the tank lid by turning it counter-clockwise
Magnetic
Sensor
Fan
Vent
