http://www.orion.ua
3
PARTS DESCRIPTION
ASSEMBLY
The heater is packaged with the feet unattached. You must attach them before operating the
heater.
WARNING: Do not operate without feet attached. Do operate the heater only in upright
position (feet on the bottom, controls on the top), any other position could create a
hazardous situation.
1. Turn the heater upside down.
2. Position the wheel base assemblies between the end fins.
3. Attach them to the heater using the U-bolts and wing nuts supplied.
4. Tighten the wing nuts.
5. Turn the heater the right way up.
OPERATION YOUR OIL RADIATOR
1. Place the heater on the floor at least 90 cm away from the wall and any other objects such
as furniture, curtains or plants. (Make sure the power supply used corresponds to the one
on the rating label).
2. Set all the controls to OFF position and insert the plug into a socket-outlet with well
grounded. Be sure that plug fits firmly.
3. Rotate the thermostat knob clockwise to MAX position and switch the heater on as follow:
the switch I for low heat, the switch II for medium heat and both switches on for high heat.
1.
Carry handle
2.
Thermostat knob
3.
Power switch
4.
Cord storage
5.
Radiant fins
6.
Castor
1
2
3
5
4
6
