Orion MPDP Скачать руководство пользователя страница 4

Страница: 4 / 24

STAND UNIT

Infinitely Expandable

TAND UNIT

Safety Precaution

※Please.keep.all.the.cautions.and.warnings.for.proper.use.of.the.product.and.prevent.possible.accident.or.hazard.
※You.can.find.“CAUTION”.and.“WARNING”.signs.in.this.manual..Each.sign.has.following.meaning.

Please read and understand this manual fully before installation.

Please hand over this manual to customers after installation and ask to read

and keep this manual for future use.

WARNING

If the user does not comply with this instruction, serious injuries or death

can be caused.

CAUTION

If the user does not comply with this instruction, minor injuries or product

damage can be caused.

Installation must be done by the skilled persons

designated by sales agent or dealership.

Installation work can be very dangerous for inexperienced
person.
It may cause serious injury or even death.

Do not install at unstable locations that cannot

withstand product weight.

In case of weak floor or ground, product may fall and cause

injuries.

If you need to move or replace the product,

please contact with skilled persons designated

by sales agent or dealership

If users move or install the product without proper skill and

experience, it may cause safety problem.

Do not hang on the product and avoid severe

impact to the product.

Product may fall and cause injuries.

WARNING

Please install as described in this manual.

Improper installation may cause serious injury or product
damage.

Installation of this product needs 3 or more

people.

3 or more people need to work together to avoid personal injury
or product damage.

Use enclosed accessories.

Improper accessories may not withstand the weight of the
product. It may cause safety problems.

Install on the even ground or floor.

Product installed on uneven places such as inclined places or
stairways may fall and cause personal injury or product damage.

Do not use heaters or humidifiers at the place of

installation.

Heat or vapor may cause fire, electric shock or malfunction.

Do not install the product near to sprinkler, fire

detector, high-voltage cable, power source, or

places of vibration or impact.

Make sure to disconnect before installation.

If you install the product while the power cord is still connected,
it may cause electric shock or fire.

Use working gloves when you install.

Wear working gloves to avoid any injury.

CAUTION

User's Manual

Содержание MPDP

























Результаты поиска

Содержание MPDP

Отзывы:

Похожие инструкции для MPDP

Бренды по названию

Популярные бренды

Orion MPDP, Руководство пользователя

Результаты поиска

Содержание MPDP

Отзывы:

Похожие инструкции для MPDP

Бренды по названию

Популярные бренды