PANEL STATUS INDICATORS & CONTROLS
STATUS
FIRE – LED used to indicate any FIRE ALARM condition present on panel.
FAULT – LED used to indicate Fault condition present on panel. In case of communication fault between ORION and ORION MINI REP V2
or any other peripheral, Fault LED will flash at a rate of once per second.
DISABLED – Disabled Status LED used to indicate that the panel has functions that have been disabled in either Access Level 2 or 3
modes. Check ORION for detailed information.
TEST – This LED is active whenever panel is in TEST MODE. Only activated when in Engineering Mode and TEST mode has been selected
at the ORION panel.
SUPPLY - This LED signals the presence of Supply. Additionally, when in Access Level 1 this LED is permanently on. If in Access Level 2
(USER CODE 2244) this LED will flash at a rate of once per second.
SYSTEM FAULT – This LED will be lit whenever there is a processor failure or corruption of the panel firmware.
FAULTS
SUPPLY FAULT – This LED will be ON whenever the Main Supply has been removed or has dropped below 20 Volts.
BATTERY FAULT – Indicates that there is low voltage level on the batteries or the battery charger circuit has failed.
AUX. SUPPLY FAULT – Indicates that the Auxiliary Supply has a fault.
EARTH FAULT – When this indicator is ON, there is leakage current flowing between the Earth connection/wiring and any other wire
connected to the panel.
SOUNDER FAULT –
If there is a conventional sounder circuit fault, the general FAULT LED will be lit and the DISABLE SOUNDERS LED in
the DISABLEMENTS section will be flashing.
ZONES & INPUTS
Individual zone and monitored input indicators are provided for both FIRE/ALARM, EXTINGUISH and FAULT conditions. If any of these
inputs is disabled, then its Fault LED will also be used to indicate the disablement of that particular zone/ input. The zone/ Input
Disabled LED will be ON along with the associated disabled status LED. Flashing Fault LED along with general Fault LED indicates fault on
that zone.
ORION MINI-REP V2 / Installation, Operation & Maintenance Manual / © GFE 210609
5
