33
METHOD 3
Press
S
to enter the system select mode and follow the
selection mode rules detailed earlier. Presses of the RAMP
control
,
or
.
will now scroll through the systems.
Group And Channel Selection
Several methods, some of which depend on programming, can be used to
select a new group or channel. These procedures are presumed to be starting
from the normal receive display.
METHOD 1
If group selection is programmed to the SYSTEM/GROUP/
CHANNEL knob, select a group by turning the SYSTEM/
GROUP/CHANNEL knob to the desired group. The
display registers the new group name on line two. If the
wrap option is OFF and the knob is moved to a position
greater than the number of programmed groups, the highest
programmed group will remain selected.
METHOD 2
If group selection is programmed as the primary function of
the RAMP control
,
and
.
, selects a group by
pressing
,
or
.
, to scroll through the group list. The
display registers the new group name on line two.
METHOD 3
Press
g
to enter the group select mode and follow the
selection mode rules detailed earlier. Presses of the RAMP
control will now scroll through different groups.
