Orion Dynamo Pro Series, Инструкция по эксплуатации

Страница: 4 / 8

4
Insert the cigarette lighter cable into the
car’s 12v cigarette lighter jack, and insert
the other end into the 5.5mm DC input
jack on the Dynamo Pro ( figure 3 ). As
the Dynamo Pro charges, the blue battery
indicator lights will flash in series. When
all indicator lights are solid, the Dynamo
Pro is fully charged. Do not attempt to
charge the Dynamo Pro unless the engine
is on. The Dynamo can drain the power of
a car battery that isn’t being charged if the
car is not running.
Charging can take up to 7-8 hours depend-
ing on how depleted the battery was when
charging commenced.
3. Protection Mode
The Dynamo Pro will go into protection mode if it senses too much power being drawn through
the outputs. If more than 100W is pulled through the AC output, protection mode will activate,
shutting the unit down. Remove the device, and press the AC output button to reset the unit.
If the problem occurs over the DC outputs (either a short circuit or power greater than 180
watts), remove the devices and recharge the unit to recover from protection mode. Please do
not overload the Dynamo Pro with devices that pull more power than the Dynamo is capable
of handling.
4. Storage and Maintenance
To optimize the life of the Dynamo Pro, several steps should be taken for its proper storage
and maintenance. Keep the Dynamo Pro stored a dry, cool area when not in use. Fully charge
the Dynamo Pro before putting it into storage. If you are going to store the Dynamo Pro for
long periods of time, you should occasionally recharge it – once every three months for optimal
storage and lifespan, and at LEAST once every 6 months.
The Dynamo Pro has a useful lifespan of at least 500 full charge cycles. At some point, as with
all rechargeable batteries, the lithium ion cells inside will no longer be able to hold a full charge,
and the capacity will decrease. After its useful life, please recycle this battery at a facility that
can take used batteries. Please do not dispose of in the trash to avoid waste pollution. Most
city and counties have recycling programs that can handle Lithium Ion batteries.
5. Safety
1. Do not use or charge the unit if the housing is cracked.
2. Do not ship the unit if the housing is cracked.
3. Do not attempt to short circuit the battery.
4. Do not heat the unit, or dispose of in fire, water or other liquids. Keep away from high
temperatures (normal operating range: 14°F–104°F (-10°C-40°C).
5. Do not attempt to disassemble the unit.
6. Do not drop the unit or place heavy objects on top.
Figure 3.
Dynamo Pro Flashlight and DC
input
Flashlight power/
mode button
Flashlight
DC charging
input