30
One-Touch Timer Recording (OTR)
3
4
OTR 1 : 30
CH 29
“REC” will keep blinking
in the display.
VCR
1
2
VCR
CH 29
OTR 0:30
INDEX
REC
VCR
The one-touch timer recording feature
provides a simple and convenient way
to make a timed recording.
Notes:
• If you wish to watch the DVD playback
during the OTR, press
DVD
to change
to DVD mode and perform the DVD play-
back (see page 39).
• If the tape supply has not sufficed for
OTR
recording, the clock symbol (
)
will blink at the tape-end and then VCR
mode will change to DVD mode.
In this case, press
TIMER REC
to
cancel the
blink or press
(EJECT)
to remove the cassette tape.
Preparation
• Turn ON the TV and set to the video input mode.
• Press
VCR
to select the VCR mode. (The VCR indicator will
light.)
Load a blank cassette tape with the erase
prevention tab intact. (The DVD/VCR will
automatically turn on.)
Select the program(e.g.29) you want to record with
(CHANNEL) +/–
or
10 number buttons
.
1~9 : e.g. 5 = press “
5
”
10~80 : e.g. 29 = press “
2
” and “
9
”.
If a recording in Long Play mode
is intended, press
TAPE SPEED
to display "LP".
Press
REC/OTR
twice. The recording will start and stop after
30 minutes. Each additional press
of
REC/OTR
will increase the
recording time for another 30 min-
utes up to a maximum of 6 hours
(See table below).
If
REC/OTR
is pressed once during the recording, the re-
maining time appears on the screen. When pressed again, the
recording time is extended to the nearest 30-minute interval.
To Extend the Recording Time
Press
REC/OTR
repeatedly until the
desired time appears on the display.
To stop the OTR
Press
3
3
3
3
3
(STOP)
.
00:00:00 LP
2:00
5:00
4:00
3:00
1:30
Recording
0:30
1:00
6:00
2C98710A[E](28-33)
20/1/04, 3:18
30
