Orion CVD605 Скачать руководство пользователя страница 12

Страница: 12 / 64

Playback connection

Coaxial digital cable (not supplied)

AV Amplifier with
built-in various
decoder as above

DVD/VCR

To Audio (L) Input
To Audio (R) Input

AUDIO Cord (not supplied)

Stereo Amplifier

DVD/VCR

Audio (R) Output

SCART-cable (supplied)

Audio (L) Output

Coaxial digital
Audio Output

SCART-Socket
(for TV-RGB/Composite)

To SCART
input

SCART-cable (supplied)

To SCART
input

SCART-Socket
(for TV-RGB/Composite)

Connect to a Stereo Amplifier with Audio Output

If your DVD/VCR is connected to a stereo amplifier, the video soundtrack can output through the loudspeakers of
the stereo system.

Connect to an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
such as Dolby Digital and DTS by using the Coaxial Digital Output.

Use this connection to connect an:
• AV amplifier with built-in *Dolby Digital decoder
• AV amplifier with built-in *DTS decoder

Notes:

• The COAXIAL jack is useful only for DVD section.

VHS signal is output only from the SCART-sockets, AUDIO L/R jacks and RF OUT jack.

• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV

Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the
speakers to be damaged.

• DTS audio will be output only from the COAXIAL output. To hear DTS audio, DTS-Decoder is necessary.

When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

2C98710A[E](12-15)

20/1/04, 3:16

Содержание CVD605

































































Результаты поиска

Содержание CVD605

Отзывы:

Бренды по названию

Популярные бренды

Orion CVD605, Инструкции к книге

Результаты поиска

Содержание CVD605

Отзывы:

Бренды по названию

Популярные бренды