GB
4
3. MENU
OPERATION
Press [INDEX] key to display MENU pages. Scroll the MENU by using [V+]/[V-] key, as follows:
TV MODE
SOUND
Æ
PICTURE
Æ
DIRECTORY
Æ
SETTING
Æ
TUNING
SCT1, RGB , SCT2 , Y/C, AV MODE
SOUND
Æ
PICTURE
Æ
SETTING
MENU display disappears about 15 sec. after last selection.
You can also directly select PICTURE MENU by press the [PICTURE MENU] key on remote control unit, select SOUND MENU
by press the [SOUND] key.
3-1 SOUND MENU
Select the Sound menu by pressing the [ MENU ] and [V+] / [V-] key on remote or on TV set .
Pressing the [P+] / [P-] key, highlighted item will move up and down.
1.
VOLUME, BALANCE, BASS, TREBLE
Press [P+] / [P-] key on remote or on TV set to select Volume, Balance, Bass or Treble.
Press [V+] / [V-] key on remote or on TV set to adjust these parameter.
Press the [ MENU ] key to confirm your choice.
Press the [ MENU ] key to exit.
Repeat any functions if required.
2. When selected item is
AVL (Automatic Volume Leveller),
pressing the [V+] / [V-] key, the AVL function can be on or off.
3. When selected item is
LOUDNESS,
pressing the [V+] / [V-] key, the "LOUDNESS" function can be on or off.
4. When selected item is
ENHANCED
, pressing the[V+] / [V-] key, the "LISTENING MODE" can be changed between
NORMAL
and
INCREDIBLE STEREO
mode, (if signal received is mono, the effect will be “INCRED.MONO”).
5. When selected item is
EQUALIZER
, select the desired frequency by pressing the [V+] / [V-] key and adjust it to desired
setting by [P+] / [P-] key.
3-2 PICTURE MENU
Select the Picture menu by pressing the [ MENU ] and[V+] / [V-] key on remote or on TV set .
Pressing the [P+] / [P-] key, highlighted item will move up and down.
1.
BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS,
Press [P+ ]/ [P-] key on remote or on TV set to select Brightness, Contrast, Colour, Sharpness or Tint.
Press VOL+/VOL- keys on remote or on TV set to adjust these parameter.
Press the [ MENU ] key to confirm your choice.
Press the [ MENU ] key to exit.
Repeat any functions if required.
NOTE:
TINT
is applicable for only NTSC play back only
Use this function to adjust tint of picture for NTSC signal
2.
PIC.IMPROVEMENT,
pressing the [V+] / [V-] key the function can be on or off.
3.
FCC
, pressing [V+] / [V-] key FCC can adjust the colour temperature of the picture to
NORMAL
Æ
WARM (reddish)
Æ
COOL (bluish)
4.
ZOOM
, pressing [V+] / [V-] key ZOOM, can be changed as follows:
AUTO
Æ
NORMAL
Æ
EXPAND