11
WIRELESS AUTODIAL
HOME ALARM SYSTEM
AM2000
›
Arm
1. Call alarm panel by dialling SIM card number.
2. Hang up after hearing ring tone.
3. Alarm panel will call back.
4. Reject the call back.
5. Alarm panel is armed.
›
Disarm
1.
Call alarm panel by dialling SIM card number.
2. Hold on until alarm panel hangs up the call.
3. Alarm panel will not call back.
4. Alarm panel is disarmed.
›
Arm
Press (
Arm
) to arm the
alarm panel.When the
alarm panel beeps once
and button illuminates,
the system is armed.
When intruders are detected, the siren will
hoot to deter the intruder. (The siren turns off
after ringing for 1 minute in default setting.)
At the same time, the alarm panel dials the
pre-stored phone numbers automatically.
›
Disarm
Press (
Disarm
) to disarm
the alarm panel. When the
alarm panel beeps twice
and button illuminates,
the system is disarmed.
When intruders are detected, siren will keep
hooting. Press (
Disarm
) to stop
siren hooting.
›
Home Mode
Press (
Home
) to arm the
home mode.
All the sensors in Normal Zone are armed
except those in Home Mode Zone which
are disarmed so that user can move freely at
home.
›
Mute Mode
Press (
Home
) button
on the remote control,
then press (
Arm
) or
(
Disarm
) button, the
siren keeps silent to
finish the operation. The system is armed or
disarmed in mute without hooting to avoid
disturbing other people.
›
Emergency Call
No matter what state the
control panel is in, once
SOS Button
on the remote
is pressed, the system
immediately goes into
emergency alarm state.
0000
3
WIRELESS REMOTE CONTROL
LED INDICATOR
DISARM
ARM
HOME
PANIC
2.33 ARM & DISARM BY FREE
PHONE CALL
2.32 RESTORE SYSTEM TO DEFAULT
SETTING BY SMS
Send:
NOTE:
Do not press and hold more than one button at the time.
After a button is pressed, please wait for 5 seconds for the
command to be completed.
