RGS-9244GP Series User Manual
ORing Industrial Networking Corp.
82
DSCP value is always taken from the '
DSCP Translation->Egress
Remap DP0
' table.
Remap DP Aware
: DSCP from the analyzer is remapped and the
frame is remarked with a remapped DSCP value. Depending on the
DP level of the frame, the remapped DSCP value is either taken
from the '
DSCP Translation->Egress Remap DP0
' table or from
the '
DSCP Translation->Egress Remap DP1
' table.
5.6.5 Port Policing
This page allows you to configure Policer settings for all switch ports.
Label
Description
Port
The port number for which the configuration below applies
Enable
Check to enable the policer for individual switch ports
Rate
Configures the rate of each policer. The default value is
500
. This
value is restricted to 100 to 1000000 when the
Unit
is
kbps
or
fps
,
and is restricted to 1 to 3300 when the
Unit
is
Mbps
or
kfps
.
Unti
Configures the unit of measurement for each policer rate as
kbps
,
Mbps
,
fps
, or
kfps
. The default value is
kbps
.
Flow Control
If
Flow Control
is enabled and the port is in
Flow Control
mode,