RGPS-7244GP / RGPS-7244GP-P User’s Manual
ORing Industrial Networking Corp
63
4.1.7.3 SNMP-Users
Configure SNMPv3 users table on this page. The entry index keys are Engine ID and User
Name.
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
Engine ID
An octet string identifying the engine ID that this entry should belong
to. The string must contain an even number between 10 and 64
hexadecimal digits, but all-zeros and all-'F's are not allowed. The
SNMPv3 architecture uses the User-based Security Model (USM) for
message security and the View-based Access Control Model (VACM)
for access control. For the USM entry, the usmUserEngineID and
usmUserName are the entry's keys. In a simple agent,
usmUserEngineID is always that agent's own snmpEngineID value.
The value can also take the value of the snmpEngineID of a remote
SNMP engine with which this user can communicate. In othe words,
if user engine ID equal system engine ID then it is local user;
otherwize it's remote user.
User Name
A string identifying the user name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is the
ASCII characters from 33 to 126.
Security Level
Indicates the security model that this entry should belong to. Possible
security models are:
NoAuth, NoPriv: None authentication and none privacy.
Auth, NoPriv: Authentication and none privacy.
Auth, Priv: Authentication and privacy.
The value of security level cannot be modified if entry already exists.
That means must first ensure that the value is set correctly.
Authentication
Protocol
Indicates the authentication protocol that this entry should belong to.
Possible authentication protocols are:
None: None authentication protocol.