RGPS-7244GP / RGPS-7244GP-P User’s Manual
ORing Industrial Networking Corp
21
seconds.
Tx Hold
Each LLDP frame contains information about how long the
information in the LLDP frame shall be considered valid. The
LLDP information valid period is set to Tx Hold multiplied by Tx
Interval seconds. Valid values are restricted to 2 - 10 times.
Tx Delay
If some configuration is changed (e.g. the IP address) a new
LLDP frame is transmitted, but the time between the LLDP frames
will always be at least the value of Tx Delay seconds. Tx Delay
cannot be larger than 1/4 of the Tx Interval value. Valid values are
restricted to 1 - 8192 seconds.
Tx Reinit
When a port is disabled, LLDP is disabled or the switch is
rebooted a LLDP shutdown frame is transmitted to the
neighboring units, signaling that the LLDP information isn't valid
anymore. Tx Reinit controls the amount of seconds between the
shutdown frame and a new LLDP initialization. Valid values are
restricted to 1 - 10 seconds.
LLDP Port Configuration
Label
Description
Port
The switch port number of the logical LLDP port.
Mode
Select LLDP mode.
Rx only The switch will not send out LLDP information, but LLDP
information from neighbor units is analyzed.
Tx only The switch will drop LLDP information received from
neighbors, but will send out LLDP information.
Disabled The switch will not send out LLDP information, and will
drop LLDP information received from neighbors.
Enabled The switch will send out LLDP information, and will
analyze LLDP information received from neighbors.
CDP Aware
Select CDP awareness.
The CDP operation is restricted to decoding incoming CDP
frames (The switch doesn't transmit CDP frames). CDP frames
are only decoded if LLDP for the port is enabled.
Only CDP TLVs that can be mapped into a corresponding field in