![background image](http://html1.mh-extra.com/html/oring/igps-9842gtp/igps-9842gtp_user-manual_1651940070.webp)
IGS-9844/9848GPF Series User Manual
ORing Industrial Networking Corp
69
16-bit groups of contiguous zeros; but it can only appear once. It also
uses a following legally IPv4 address. For example, '::192.1.2.34'.
Trap
Authentication
Failure
Indicates the SNMP entity is permitted to generate authentication
failure traps. Possible modes include:
Enabled
: enable SNMP trap authentication failure
Disabled
: disable SNMP trap authentication failure
Trap Link-up and
Link-down
Indicates the SNMP trap link-up and link-down mode. Possible
modes include:
Enabled
: enable SNMP trap link-up and link-down mode
Disabled
: disable SNMP trap link-up and link-down mode
Trap Inform Mode
Indicates the SNMP trap inform mode. Possible modes include:
Enabled
: enable SNMP trap inform mode
Disabled
: disable SNMP trap inform mode
Trap
Inform
Timeout(seconds)
Configures the SNMP trap inform timeout. The allowed range is 0 to
2147.
Trap Inform Retry
Times
Configures the retry times for SNMP trap inform. The allowed range
is 0 to 255.
5.5.2 SNMP Community Configurations
You can define access to the SNMP data on your devices by creating one or more SNMP
communities. An SNMP community is the group that devices and management stations
running SNMP belong to. It helps define where information is sent. A SNMP device or agent
may belong to more than one SNMP community. It will not respond to requests from
management stations that do not belong to one of its commun ities. This page allows you to
configure SNMPv3 community table. The entry index key is
Community
.