![background image](http://html1.mh-extra.com/html/oring/igps-9842gtp/igps-9842gtp_user-manual_1651940016.webp)
IGS-9844/9848GPF Series User Manual
ORing Industrial Networking Corp
15
inputs.
Step 1: insert the negative/positive wires into the V-/V+
terminals, respectively.
Step 2: to keep the DC wires from pulling loose, use a small
flat-blade screwdriver to tighten the wire-clamp screws on
the front of the terminal block connector.
3.4 Connection
3.4.1
Cables
1000/100BASE-TX/10BASE-T Pin Assignments
The IGS-9844/9848GPF series have standard Ethernet ports. According to the link type, the
switch uses CAT 3, 4, 5,5e UTP cables to connect to any other network device s (PCs, servers,
switches, routers, or hubs). Please refer to the following table for cable specifications.
Cable Types and Specifications:
Cable
Type
Max. Length
Connector
10BASE-T
Cat. 3, 4, 5 100-ohm
UTP 100 m (328 ft)
RJ-45
100BASE-TX
Cat. 5 100-ohm UTP
UTP 100 m (328 ft)
RJ-45
1000BASE-TX
Cat. 5/Cat. 5e 100-ohm
UTP
UTP 100 m (328ft)
RJ-45
With 10/100/1000Base-T(X) cables, pins 1 and 2 are used for transmitting data, and pins 3 and
6 are used for receiving data.
10/100 Base-T(X) RJ-45 Pin Assignments:
Pin Number
Assignment
1
TD+
2
TD-
3
RD+
4
Not used
5
Not used
6
RD-
7
Not used
8
Not used