ORiNG IGAP-420 series Скачать руководство пользователя страница 56

Страница: 56 / 56

IGAP-420/620/6620 Series

User’s Manual

51 ORing Industrial Networking Corp.

Operation is subject to the following two conditions: (1) this device may not cause interference,

and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

L'opération est soumise aux deux conditions suivantes: (1) cet appareil ne peut causer

d'interférences,et (2) cet appareil doit accepter toute interférence, y compris celles

susceptibles de provoquer fonctionnement du dispositif.

To reduce potential radio interference to other users, the antenna type and its gain should be

so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that

permitted for successful communication.

Afin de réduire les interférences radio potentielles pour les autres utilisateurs, le type

d'antenne et son gain doivent être choisie que la puissance isotrope rayonnée équivalente

(PIRE) est pas plus que celle premise pour une communication réussie

RF exposure warning: The equipment complies with RF exposure limits set forth for an

uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

Avertissement d'exposition RF: L'équipement est conforme aux limites d'exposition aux RF

établies pour un incontrôlés environnement. L'antenne (s) utilisée pour ce transmetteur ne

doit pas être co-localisés ou fonctionner en conjonction avec toute autre antenne ou

transmetteur.

Содержание IGAP-420 series

























































Результаты поиска

Содержание IGAP-420 series

Отзывы:

Похожие инструкции для IGAP-420 series

Бренды по названию

Популярные бренды

ORiNG IGAP-420 series, Руководство пользователя

Результаты поиска

Содержание IGAP-420 series

Отзывы:

Похожие инструкции для IGAP-420 series

Бренды по названию

Популярные бренды