WLAN
模块使用手册
9 ORing Industrial Networking Corp.
Wireless Mode
Set wireless RF mode, the default setting is g/n mode
HT Mode
Select your channel width, If you are not sure which option to
use, select20/40 MHz(Auto)
TX Data Rate
Set device transmit data rate
Channel
This option is only adjustable when the Device plays the
role of wireless AP ;If the device acts as a wireless client, it
follows the channel of the associated access point
Notes: The Default Channel is Auto in order to make the device
Scan the best free channel.
VLAN Setting
Set Wireless VLAN port as untagged VLAN port
Label
Description
Multiple SSID Index
You can configure the device to use up to 4 SSIDs, and configure
each SSID differently.
Wireless Disabled
Enable/Disable Wireless Function
Notes: You can Enable/Disable wireless function by Dip switch
“R”.
WMM
WMM is a QoS standard for WLAN traffic. Voice and video data
will be given priority bandwidth when enabled with WMM
supported wireless clients.
SSID
Service Set Identifier Default is the default setting. The SSID is
a unique name that identifies a network. All devices on the
network must share the same SSID name in order to
communicate on the network. If you change the SSID from the
HIDE SSID
Enable” HIDE SSID” function , then Wireless Client can’t scan the
device’s SSID
Security Option
Select the type of security for your wireless network at Security
Type: None/WEP/WPA/WPA2-Personal /WPA-PSK or
WPA2-PSK
