Orima ORM-128-X, Инструкция по эксплуатации

Страница: 225 / 238

EN -69-
All repairing operations required for your machine should be
carried out by our authorised service. If your machine re
-
quires a repair or if you cannot remove the fault by the help
of the information provided as follows:
•
Unplug your machine.
•
Turn the water faucet off.
(*) See the chapter regarding maintenance and cleaning of
your machine.
CHAPTER -9: TROUBLESHOOTING
FAULT
Your machine does
not start.
Your machine does
not intake water.
It is not plugged. Plug machine in.
Replace the fuses.
Check mains power.
Press on Start/
Pause button.
Switch the programme
button to the desired
position.
Close the machine
door.
Turn your faucet on.
Check water inlet
hose and untwist.
Clean water inlet hose
ilters. (*)
Clean the valve
inlet ilters. (*)
Close the machine
door.
Fuses out of order.
Electricity cut-off.
Start/Pause button
not pressed.
Programme dial
‘stop’ position.
The machine door is
not completely closed.
Water tap is turned off.
Water inlet hose
may be twisted.
Water inlet hose
clogged.
Valve inlet ilter
clogged.
The machine door
not completely
closed.
POSSIBLE
CAUSE
TROUBLE-
SHOOTING