Step 5; See Figure 5:
Install Front Posts (5) and Front Panel Frame
Cross Bar (6).
A.
Use two bolts and nuts to attach the posts to
the right and left foot. Tighten just enough to
keep the posts upright.
B.
Use two bolts and nuts to secure the Front
Panel Frame Cross Bar to the posts as shown.
Figure 5
Step 6; See Figure 6:
Install Rear Posts Right & Left (7 & 8) and Rear
Curtain Support halves (9 &10).
A.
Insert a 1/4” x 3/4” bolt through the hole in
the rear bracket.
B.
Place the Rear Curtain Support over the bolt
then place the lower end of the Rear Post left
over the bolt. Add a nut and tighten just enough
to keep the post and rear support
upright as shown.
C.
Repeat the above steps on the right side.
Note:
Latch plate on rear post should be on
front side of the post with the notch to the
outside. Rear Curtain Support should be level.
5
6
7
8
9
10
Figure 6
7