Step 3; See Figure 3 & 3a:
Install Foot Right (1) and Foot Left (2).
A.
Remove the two bolts that hold the dash to
the fenders.
B.
Insert the right Foot between the dash and
fender as shown with the tab leaning forward.
C.
Replace the bolts. Do not tighten at this
time.
D.
Repeat the above steps on the left side with
the left Foot.
Figure 3
1
Figure 3a
Step 4: See Figure 4:
Install right & left Rear Bracket (3 & 4)
A.
Replace the plate on the right side. Insert
1/4” x 5/8” bolts with 1/4” lock washers through
the tabs on the right Rear Bracket (short tabs).
Replace the two forward bolts that hold the
plate. Tighten the bolts.
B.
Install the left Rear Bracket in similar fashion
on the left side.
3
Figure 4
6
