Original inside NOVACAT 8600, Руководство оператора

Страница: 41 / 69

- 41 -
GB
MAINTENANCE
0900-GB WARTUNG_3841
Setting the field transport position (end-of run turns)
The following guide is valid for both cutter bars.
1. Set sensors´ gap (2 mm).
2. Raise both cutter bars until hydraulic cylinders have travelled in
to a measurement of ”1100 mm”.
3. Loosen plate screws (10).
4. Move plate (10) in slot until edge is positioned just at sensor
(S1).
5. Retighten plate screws.
Adjustment of sensors
Always carry out adjustments and controls in that operating position
where the distance from the sensor is smallest.
When doing this, a possible assembly clearance should also be taken into account.
Distance 2 mm
1100 mm