Fin
Wall Light
PLEASE READ THE INSTRUCTIONS ON THE REVERSE BEFORE YOU BEGIN INSTALLING YOUR LIGHT
120V ac 60Hz
Installation Diagram
IP20
US-FW574
Fin Wall Light
E26
A
LAMP GUIDANCE
TYPE*
WATTAGE**
BASE
SHAPE
INCANDESCENT
CFL
ECO-HALOGEN
LED
40W MAX
15W
28W
10W
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
Contents
1 - Shade
2 - Lamp holder
3 - Stem
4 - Fixing Screw x3
5 - Back box
6 - Wall bracket
Required for Installation (not included)
8 - Junction Box
9 - 3 x Connection Nuts
-
Screwdriver, flat-head
- Small screwdriver, flat-head
- Drill (if holes are required)
6
5
1
Refer to diagrams on opposite page.
STEP 1
Remove the wall bracket from the back box by undoing the three fixing screws.
STEP 2
Line up the cover disc ‘C’ with your existing junction box, then position the backplate ‘D’ over the plate and j-box so
the fixings line up. Use existing j-box screws to fix in position.
STEP 3
Make electrical connection to mains supply, see point 5 on reverse page.
STEP 4
Slide the backbox over the wall bracket, aligning the three holes around the circumference. Secure in place using
the three fixing screws (G)
2
3
4
Installation and Assembly Instructions
BALL
7
8
9
7 - Junction Box
Cover Disc
Key
A Junction Box (not supplied)
B Main Supply
C Cover Disc
D Back Plate
E J-Box Fixing Screws (not supplied)
F Connection Nuts (not supplied)
G Fixing screws
A
B
C
D
F
E
G
