6
Please note, in case, the water tank has not been positioned well, the water full indicator will
turn into red.
4.Drainage
When the water tank is full, the compressor will stop for self-protection and the water full
indicator will turn into red.
To move the water tank, pull it out squarely from the unit.
After emptying the water tank, place the water tank into space. Make sure it is properly
positioned, in order for the 'water full' sign to go out and your dehumidifier is operating.
Please note, in case, the water tank has not been positioned well, the water full indicator will
turn into red.
Continuous drainage
When the dehumidifier is operated at very high humidity levels, the water tank will require
more frequent drainage. In this situation, it may be more convenient
to set the unit up for continuous drainage with the following
procedures:
1.
Pull out the water tank.
2.
Connect the drain hole with water tube of inner diameter: 11 mm.
3.
Ensure the water will always drain away freely and the tube will
remain in right place. Note! In very cold weather conditions,
precautions should be taken to prevent the water tube from
freeing water tube of inner diameter 11mm.
4.
Put the water tank back to its position.
STORAGE
If the unit is not in use for an extended period of time. Please:
Turing the unit off, unplug and tidy AC cord.
Completely empty the water tank and wipe it clean.
Cover the unit and store where it will not receive direct sunlight.