5
3.Operation
3.1 Plug the unit into a correct mains socket. (Please refer to the rating label at the rear of
the unit for correct voltage/frequency.)
3.2 Press ON/OFF button to turn on the unit. The compressor will start to work.
3.3 Press
humidity setting button to set the working model you need: continuous
working, humidity 40%, 50%, 60% or 70%. The relative indicator will light on.
3.4 Press
speed/ventilation button to set the ventilation speed, high or low. The relative
indicator will light on.
3.5 Press the TIMER button to set the operating hour you need (1~24 hours). The display
window will show the hour(s) you set as you press the TIMER button, after releasing it
for 8 seconds around, the display window will return to the room humidity.
As the set
time has been reached, the compressor will stop working automatically.
3.6
DRYER function is turbo ventilation to dry the moisture in the air continuously, so it
could help to dry the laundry.
3.7
1 .
Press one of the two buttons to start the energy saving mode.(60%humidity,slow wind)
3.8 If you don’t want to dry the air, just want to circulate the air or remove the odor inside the
room, please press AIR CLEAN button.
3.9 To turn off the unit, press ON/OFF button again.
3.10 Pre-setting function
By pressing TIMER button but without turning on the other
functions (including ON/OFF button), you can PRE-SET the time for the machine to
work. For example, if you press the timer to '2', the unit will work automatically after 2
hours.
3.11 While the water tank is full, the compressor will stop for self-protection and the water full
indicator will turn into red.
To move the water tank, pull it out squarely from the unit.
After emptying the water tank, place the water tank into space. Make sure it is properly
positioned, in order for the 'water full' sign to go out and your dehumidifier is operating.
you can begin by positioning
the dehumidifier close to
this area and later moving it
to a more central point.
move the unit, it should
first be switched off and
the water tank emptied.
windows should be closed
when necessary for most
efficient use.
