HeadMouse Extreme User Guide
Origin Instruments Corporation
Page 9
Figure 3: HeadMouse Extreme Rear Panel.
On the rear of the HeadMouse case are informational labels and
the sensor serial number. This information is needed for
registration as well as for troubleshooting and possible future
firmware upgrades.
A small circle of Dual Lock fastener is centrally located on the rear
panel of the HeadMouse Extreme for use in mounting. The high-
density Dual Lock fastener on HeadMouse Extreme is designed to
mate with low-density Dual Lock fasteners on mounts or directly
on the bezel of your computer's display. A kit of Dual Lock
fasteners is included with your HeadMouse Extreme.
Four small DIP switches are accessible through an opening on the
rear panel of the HeadMouse Extreme. These switches are factory
set and only rarely need to be changed by the user.
The default switch settings are all in the
ON
position.
