19
MODE DIP SWITCH
Located on the rear panel, the MODE DIP switch controls the following settings.
1 DRY/BYPASS DIP SWITCH:
The DRY/BYPASS switch is only relevant when the RE-
AMP switch is set to the PWR AMP position (with the RE-AMP switch set elsewhere,
changes to the DIP switch position will have no effect). With PWR AMP selected, the
DRY/BYPASS DIP switch modifies the BYPASS and DRY signal path to incorporate the
pedal's PREAMP circuitry.
In bypass, with switch 1 in the downward position, the signal present at the input
connector is routed to the pedal's output via a high-quality buffer. With the pedal engaged,
any blended DRY component is fed from the same buffer. Use this setting when plugging
into a guitar amp.
When plugging into a flat-response power amp, move the switch to the upward position.
When the pedal is bypassed, the input signal now passes through the preamp filter stage,
controlled by the PREAMP switch on the currently active channel. This means you can
still take advantage of the RevivalDRIVE’s classic amp-style tone shaping, even when not
using the main overdrive circuit. The pedal’s two channels remain switchable even in
BYPASS mode, allowing you to set up two distinct tones.
2 RECTIFER DIP SWITCH:
Move switch 2 to the
up position to transform the VALVE RECTIFIER
channel
into
a
second
SILICON
RECTIFIER
channel.
3 GHOSTING DIP SWITCH:
Switch 3 toggles
between 50Hz/British (switch down) and 60Hz/USA
(switch up) simulated mains frequencies, subtly
altering the pitch of the ghost tones generated.
REVIVAL FOOTSWITCH
Connecting the optional dual-button Revival Footswitch (sold separately) to the
F/SWITCH input at the rear of the pedal provides two further functions.
MID-ENGAGE:
With the pedal’s MID ASSIGN switch set to F/SWITCH, this allows you
to apply the adjustable mid boost to whichever channel is currently selected.
Please note: the MID BOOST is applied to both the DRY and O.D. signals mixed by the
BLEND control. The MID BOOST function is not active when the pedal is in BYPASS
mode.
MODE DIP switch
