Origin Acoustics PROFESSIONAL PC50, Руководство по установке

Страница: 11 / 16

Professional Collection Manual
5. Determine the proper wattage setting for each
speaker in the installation and set each speaker’s
transformer tap selector on the front of the speaker
accordingly.
(See Figure G)
.
7. Fit the grille onto the speaker.
(See Figure I)
Figure G
Figure I
9
4. Make sure all the dog leg (L-shaped) clamps on the speaker are in the upright position
and facing to the side, not outwards. Insert the speaker into the hole. Turn the four screws
so that the dog legs face outwards and continue turning until they clamp down on the
ceiling. When you feel resistance, stop tightening the screws. If you need to remove the
speaker, turn the screws in the opposite direction.
(See Figure F)
7.92in
201.2mm
9.61in
244mm
Min cutout:
8.72in
221.5mm
10.02in
254.6mm
PC60
SCALE:1:5
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S O R I G I N
®
Figure H
6. The speaker has a pivoting tweeter assembly,
allowing the treble to be directed to the most suitable
location if the speaker is installed of-axis. To pivot the
drivers apply light pressure to the ring around the
outside edge of the tweeter cone. Take care not to touch
or apply pressure to the cone itself.
(See Figure H)
Figure F