Origin Acoustics PROFESSIONAL PC50, Руководство по установке

Страница: 10 / 16

Professional Collection Manual
8
2. Connect the wires from your amplifier to the male terminal connector at the rear of speaker.
Strip approximately 3/16” (5mm) of the insulation off each wire. Insert the wire into the
correct square` opening on the connector.
Use a small flat head screwdriver to tighten the
corresponding screw to secure the wire.
(See Figure B & C).
3. When using multiple speakers you can connect the speakers either in parallel or in the
loop through method as shown below
(See Figure D & E)
.
Loop Through Connection
From Power Amplifier
To Next Speaker
From Power Amplifier
To Next Speaker
Parallel Connection
Figure E
Figure D
Installation
Figure B
Figure C
1. Cut a hole in the drywall using the supplied
cutout template
(See figure A)
Figure A