Origin Acoustics DSUB6F3K, Руководство по установке

Страница: 8 / 20

6
DSUB Collection™ Manual
Install the BZ68 Zip-Cliq ring. Pull the
port tube through the ring, slip the port
adaptor into the end and tighten the
screw on the hose clamp to get a snug,
secure attachment.
Fit the port adaptor into the Zip-Cliq,
and twist it clockwise into place. When
the arrows on the port adaptor line up
with one of the lock icons on the InstaMount the speaker is tightly in place. You
Use the 8 supplied screws to attach
the port tube to the enclosure. Test
the wired DSUB to see that it’s working
properly. If you are using 2 channels
of input, make sure to test both.
Install the BR68 new construction
bracket to position the hole for the
port opening. Make sure this hole is
located close enough to the enclosure so that you will be able pull about 6” of the
port tube through this hole.
3. Installation after Drywall
2. Installation before Drywall