Origin Acoustics DSUB6F3K, Руководство по установке

Страница: 7 / 20

5
DSUB Collection™ Manual
Hold the template to the joist that
you plan on attaching the subwoofer
enclosure to. Drill six holes through
the marked locations on the template
using a 5/16” (8mm) drill bit. Face
the enclosure’s rubber damping pad
towards the joist and secure it in place
with the supplied lag screws and
washers. We recommend that one person holds the subwoofer in place while
another tightens the screws to secure the DSUB to the joist.
1. Installing the Enclosure
colors or patterns are used. You can choose whichever color of wire you want to
be positive and negative as long as you remain consistent throughout the install.
On both your amplifier and your speaker the connectors will be identified as red
for positive and black for negative. It is very important to look carefully at the
speaker wires and be certain that the same wire that is attached to the positive
connector in the amplifier is attached to the positive connector in the speaker.
Template
Screws (6)
Enclosure