Origin Acoustics Crown CDi CDi1000, Руководство по установке

Страница: 9 / 12

7 WWW.ORIGINACOUSTICS.COM
LANDSCAPE CROWN AMPLIFIER INSTALLATION MANUAL
EQ Presets on Crown CDi Amplifiers for Origin Acoustics
Pr
ese
t #
Pr
ese
t name
Use this Sub Use this Sat
ellit
e
Implications & Recommendations
When Sats and Subs on separate, designated wire runs (#2-8: Subs Ch1; Sats Ch2)
1
DSP OFF No EQ or active crossover
2 AX0-64 0 64 No Sub
3 AX8-44 8 44 Subwoofers on one run & Satellites on
another run. Subwoofers crossed over to
Satellites
4 AX8-64 8 64
5 AX10-44 10 or 12 44
6 AX10-64 10 or 12 64
7 AX-44 0 44 LS44 satellites only. Subs to use second amp
8 AX-64 0 64 LS64 satellites only. Subs to use second amp
9 AX-8 8 Any 8” sub only. Satellites to use second amp
10 AX10 10 Any 10” sub only. Satellites to use second amp
11 AX12 12 Any 12” sub only. Satellites to use second amp
12 AX8-8ohm 8 Any Switch 8” sub to 8Ω. Satellites to use
second amp
13 AX44-8ohm 8 44 Switch LS44s sub to 8Ω. 8” subs to use
second amp
14 AX64-8ohm 8 64 Switch LS64s sub to 8Ω. 8” subs to use
second amp
When Sats & Subs are on the same wire runs
15 PX44-8
8 44 Uses passive crossover in 8” sub
16 PX64-8 8 64
17 PX44-10/12 10 or 12 44 Uses passive crossover in 10” or 12” sub. 12”
subs will result in 2dB more bass output
18 PX64-10/12 10 or 12 64
19 Br44-8
8 44 Bridged amp. Designed for 8” sub and LS44
Satellites. Uses passive crossover in 8” sub
20 Br64-10 10 or 12 64 Bridged amp. Designed for 10” & 12” sub
and LS64 Satellites. Uses passive cross-
over in sub