8
844·674·4461
How to Load a Preset
1. Press the Select / Enter button on the front of the amplifier.
2. Press the Next / Down button until the word PRESET appears
on the display.
3. Press the Select / Enter button
4. Press the Next / Down or Prev / Up buttons until the preset
you desire is displayed
5. Press the Select / Enter button
6. Your chosen preset should now be displayed
HOW MANY SPEAKERS CAN BE
RUN ON EACH CHANNEL?
Origin Landscape speakers use an adjustable 70 volt transformer
that not only let you to set speaker’s volume level relative to the
other speakers in the system, but also allows you to increase the
number of speakers that can be run on each channel. The chart
below shows the maximum number of speakers you can use be-
fore the load becomes unsafe for the Crown CDi amplifiers (2Ω
load). If you’re using the amplifier in bridged mode you’ll need to
divide the maximum speaker number in half.
LS64
LS44
OSUB8
OSUB10 OSUB12
Setting Max Setting Max Setting Max Max
Max
8 ohm 4
8 ohm 4
8ohm
2
50W
36
30W
60
70V
14
8
8
25W
50
15W
100
12W
100 7W
200
6W
200 4W
400
