background image

5

INSTALLATION INSTRUCTIONS

WARNING

 

Vanity (A) 

MUST

 be secured to wall. 

Note: 

Clean area where the vanity (A) will be 

permanently located prior to beginning installation, 

ensuring the vanity (A) will not interfere with any 

water supply and drain lines once mounted.

3. With two people, carefully place vanity (A) 

    against the wall in its final location.  

    While holding the vanity base firmly against the 

    wall, use the pre-assembled levelers on the 

    bottom of each leg of the vanity (A) to level the 

    item. Twisting the levelers counterclockwise 

    will raise the height of the vanity (A), and 

    twisting them clockwise will lower the vanity.

    Once the vanity is in place, against the wall, 

    and level from front to back and side to side, 

    drill a hole through the vanity mounting area 

    and into the wall studs (as illustrated in 

    diagram 3). Using appropriate mounting 

    hardware (not included), secure the vanity (A) 

    to a wall stud. If possible, secure the vanity 

    (A) to two wall studs for increased stability.

2. As shown in the diagram, fully extend the 

    drawer and locate the plastic levers on the 

    metal glide tracks. Push the left-side and 

    right-side levers at the same time to 

    disengage the drawer from the drawer glides.  

    Gently lift the drawer up to remove it from 

    vanity (A). 

2

A

1

2

3

1

2

A

Содержание EDISON 1690VA-30-318-901-UM












Отзывы: