background image

10

CARE AND MAINTENANCE

WARRANTY

IMPORTANT

• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product. 

• You can clean the vanity with a gentle, non-abrasive household cleaner. 

• Make sure to dry the wood immediately with a soft cloth or towel. 

• The stone top can be cleaned using standard marble cleaning agents available at your local 

  supplier. 

• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch; for worn areas, 

  stroke in direction of wood grain. Rub off excess colorant promptly with a soft cloth.

• Shade variations and patterns are an inherent characteristic of stone (e.g. granite, marble, 

  engineered stone). Stone tops will vary from product to product. Use caution placing items 

  such as soap or any fragranced material on the stone surface. Use a soap dish, coaster or 

  similar item to protect the surface if placing any soap or fragranced products on the stone. 

• If soap or fragranced products come in contact with the stone top, rinse the surface with water 

  and dry using a soft non-abrasive cloth.

• 

WARNING:

 Must use cleaning agents safe for stone. Check your cleaning agents use  

  restrictions before using on any stone. Damage to the stone may result. Vanity Manufacturer not  

  responsible for damage caused by improper cleaning agents or soaps used. Warranty will not  

  cover damage caused by the use of improper soaps or cleaning agents. 

• 

DO NOT

 use products to clean the stone top that contain acetone, lemon, vinegar or other 

  acids as these may cause damage to the stone surface.

• Periodically reseal the stone top using an appropriate stone sealer available from your local 

  home store. Follow the manufacturer’s directions on how to apply.

The manufacturer warrants this item against defects in materials and workmanship for a period of 

one (1) year from the date of original retail purchase. This warranty applies only to the original 

purchaser. This warranty does not apply to any damage on the product by accident, misuse, or 

modified, improper installation or by affixing accessories not produced by the manufacturer. The 

manufacturer will not be held liable for damages caused from cleaners or soaps that etch or stain 

the stone top. The manufacturer is not accountable whatsoever for product installation during the 

warranty period. There is no further expressed warranty. The manufacturer shall not be legally 

responsible for incidental, consequential or special damages arising at or in connection with 

product use or performance except as may otherwise be accorded by law. The manufacturer 

disclaims any and all implied warranties.  

Содержание EDISON 1690VA-30-318-901-UM












Отзывы: