Origen ae S21T, Руководство пользователя

Страница: 10 / 20

Optical disk drive (ODD) bezel installation.
The aluminum ODD bezel matches the finish of the case. The installation procedure requires that
the plastic drive bezel that comes fitted to your drive, be removed prior to installation. The drive
format icon should also be fitted to the bezel before installation. The metal sticker sheet supplied
has Blu-ray, HD -DVD or DVD icons, depending on the format being used.
Remove the existing plastic dirve bezel
from your ODD. This is usually done by
uncliping it and sliding it upwards. The
disc tray should be ejected when doing
this to gain access to the bezel.
Alignment
spacer
TOP TOP
Metal sticker fitting instructions.
Ensure the bezel is free from dirt of grease. Peel and fold back the yellow backing sheet, revealing
only the icon you intend to use. Carefully position the icon as central as possible, then apply even
pressure over the entire area. Peel off the plastic film (and unused icons) to reveal you handy work!
foam
tape
10
ODD bezel / metal sticker installation
With the tray closed, peel the back off the adhesive
foam strip on the back of the bezel. Using the
cardboard spacers, position the bezel as shown and
press firmly to ensure good adhesion. Eject the tray
to remove the spacers (a gentle tug may be required).