TFT controls / menu operation
OSD
[in orange]
The TFT controls are located behind
the chassis door. A second TFT on/off
button is discreetly located near the
power button on the underside of the
chassis. To configure the TFT, press
the
button
to bring up
the on screen display (OSD). Use the
buttons to navigate through
the 10 menu categories. Press the
button
then where
appropriate use the and to increase
or decrease the value as desired.
Press the button again to confirm
the setting then repeat the process
until you have made all the required
adjustments. To
menu/set
( )
and
to select a category
exit the OSD, simply
locate the EXIT category and press the
button (after 10 seconds of inactivity
the OSD will exit automatically).
The screen shot guide below shows
the quickest route
and the
adjustment sequence
for
each of the OSD menu categories
(all assume you are not currently in the
menu, with the exception of EXIT).
[in grey]
TFT power on/off
Value up
Menu/set
Value down
1
Contrast.
Brightness.
Language
4
2
Phase.
5
V position.
4
H position.
Clock.
3
Exit.
Auto-adjust.
3
Factory reset.
2
1 BRIGHTNESS - adjusts the picture brightness.
2 CONTRAST - adjusts the picture contrast.
3 PHASE - adjusts the noise of the image.
4 CLOCK - adjusts video sampling clock.
5 H POSITION - adjusts the image horizontally.
6 V POSITION - adjusts the image vertically.
7 LANGUAGE - language selection.
8 AUTO - auto image adjust wizard.
9 RESET - resets to factory setting.
10 EXIT - exits the TFT menu.
7
Содержание S16T
Страница 1: ...Origen S1 6T user guide...
