Origen ae S16T, Руководство пользователя

Страница: 10 / 14

Touch panel software installation
> >
In order to use the touch panel, you must first install the software
from either an install CD or downloaded from our website (www.origenae.com
and navigate to support downloads s-series). To begin installation, double
click on the setup.exe file located in the
folder.
touch panel
touch panel
1 After opening the setup.exe
file, the install will begin with
the above prompt. Click ‘Next’
to continue.
2 Ensure that ‘Install PS/2
interface driver’ is not
selected and click
. ‘Next’
3 Select ‘None’ and click .
After completing the install, the
software will perform
a 4 point calibration.
‘Next’
TouchKit
4 The touchscreen controller
should already be connected
if you have correctly
connected all cables inside
your chassis. Click ‘OK’.
5 If you intend to use spaning
mode with multiple monitors,
please select ‘Support Multi-
Monitor Systems’. Click
to continue.
‘Next’
6 Change the
software install folder if
required and click
to continue.
TouchKit
‘Next’
x
10