DO NOT INSTALL CO ALARMS
Improper location can affect the sensitive electronic components in this alarm. To avoid causing damage to the unit,. to provide
optimum performance, and to prevent unnecessary nuisance alarms:
1.
The alarm is not be located within 1.5m (5 feet) of any cooking appliance.
2.
Situations where the temperature may fall below
5℃
or rise above 38
℃
.
3.
In a damp or humid area such as near bathrooms or in shower areas.
4.
Any area where high levels of dusty, dirty or greasy emissions could contaminate or clog the sensor.
5.
Behind drapes or furniture.
6.
In the path o fair discharged from a furnace/air conditioning vent or ceiling fan.
7.
Outside the building.
8.
Directly above a sink or cooker.
WARNING:
This CO alarm is designed for indoor use only. Do not expose to rain or moisture It will not
protect against the risk of CO poisoning when the battery has drained.
DO NOT open or tamper with the alarm as this could cause malfunction.
HOW TO INSTALL THIS CARBON MONOXIDE ALARM
This CO alarm can be installed either on the ceiling or the wall using the fixings provided.
DANGER:
ELECTRICAL SHOCK HAZARD.
Turn off power at the main fuse box or circuit
breaker by removing the fuse or
switching the circuit breaker to the
OFF
position.
WARNING:
This CO alarm is mains powered and requires wiring by a qualified electrician in accordance with
the current Regulations for Electrical Installations. The circuit used to power the CO alarm must be a
dedicated permanent supply that cannot be switched off accidentally by the normal user. Before installing
ensure the electrical supply is isolated.
1.
From back of CO alarm, remove the mounting plate by turning it counterclockwise.
(To later engage tamper-resist feature, twist out and set aside one of the pins molded into plate. Both pins are exactly the
same.)
2.
Gently pull household wires through center hole of plate.
3.
Secure plate to ceiling or wall with mounting screws.
4.
With a small wire connector, connect brown wire from connecter plug to brown household
wire.
5.
Connect blue wire from connector plug to blue household wire.
