Oriental motor BX2 Driver Edition Series, Руководство по эксплуатации

Страница: 8 / 28

8
Preparation
4 Preparation
This chapter explains the items you should check, as well as the name and function of each part.
4.1 Checking the product
Verify that the items listed below are included.
Report any missing or damaged items to the branch or sales office from which you purchased the product.
Refer to “4.4 Products possible to combine” for combinations of the driver and motor.
Driver ................................................................ 1 unit
Driver mounting bracket ........................... 1 set
(Driver mounting bracket 2 pcs, mounting screw 4 pcs)
Operating manual (this document) ....... 1 copy
CN1 connector (6 pins) ........ 1 pc.
CN5 connector (11 pins) ..... 1 pc.
CN7 connector (12 pins) ..... 1 pc.
4.2 How to identify the product model
① ② ③ ④
BXSD 120 - A 2
①
Driver type BXSD : BX
Ⅱ
Series driver
② Output power
30 : 30 W 60 : 60 W 120 : 120 W
200 : 200 W 400 : 400 W
③
Power supply voltage
A : Single-phase 100-120 VAC
C : Single-phase 200-240 VAC, Three-phase 200-240 VAC
④ Identification code
4.3 Information about nameplate
The following nameplate is an example for the 120 W type driver.
Specifications
Driver model
Manufacturing date
Serial number
4.4 Products possible to combine
Products with which the drivers can be combined are listed below.
Verify the driver model and the motor model against the model name described on the package label.
In the motor model column in the table below, a part of the model name is described. For details about the motor
model, refer to the operating manual included with the motor.
Output power
Driver model
Motor model
Single-phase 100-120 VAC
Single-phase 200-240 VAC
Three-phase 200-240 VAC
30 W BXSD30-A2 BXSD30-C2 BXM230
60 W BXSD60-A2 BXSD60-C2 BXM460
120 W
BXSD120-A2 BXSD120-C2 BXM5120
200 W BXSD200-A2 BXSD200-C2 BXM6200
400 W − BXSD400-C2 BXM6400