23
NOTE:
The unit will automatically shut down the Cleaning program after 30 minutes, or you
can stop it by pressing the Clean switch again, and the machine will automatically progress
to the ice-making stage.
4.
Allow 20 minutes for proper cleaning. After cleaning, turn the machine OFF at the Power
switch. Drain off the waste water to a container by means of the drain hose at the front of the
water trough.
NOTE: Do not drain off the waste water to the inside of the cabinet.
5.
Repeat steps 3 and 4 (without Ice Maker Cleaning Solution) 3 times to rinse the ice making
system.
NOTE: The use of the Ice Maker Cleaner Solution in the water bin during the rinse is not
needed.
6.
Prepare a sanitizing solution made of 1 ounce of household bleach and 2 gallons of hot water
(95º to 115ºF). Wipe the entire bin inside and outside, covering the entire surface of the walls.
7.
Fill a spray bottle with the sanitizing solution and spray all corners and edges making sure to
cover all surfaces with the solution.
8.
Allow the solution to be in contact for at least 3 minutes, then dry.
9.
Repeat step 5 to rinse the ice-making system one more time.
10.
Set the Power switch to the ON position. The machine will return to the regular ice-making
mode. Discard the first batch of ice.
The ice machine cleaner contains acids.
DO NOT use or mix with any other solvent-based cleaner products.
Use rubber gloves to protect hands. Carefully read the material safety
instructions on the container of the ice machine cleaner.
DISCARD the first batch of ice produced after cleaning.
Содержание FS-50IMOD
Страница 8: ...7 Component Locations...
Страница 35: ...34 Ubicaci n de componentes de la m quina...