7.
Enter the pass code 0000 to pair and connect the headset to your phone.
Notes: When the pairing done, the indicator flashes in blue for three quick times and after that it will flash in
blue a time every 7 seconds. If unsuccessful paring, the indicator will flash in blue and red alternately or the
mobile phones shows no Bluetooth devices. At this time, it needs re-pairing.
Wear the headset
Wear and adjust it according to the ease of your ear.
Dial by the headset
Dialing ways vary with the settings of mobile phones. Such as, the GSM mobile phone uses handsfree to dial
while the CDMA uses headset and handsfree to dial.
Answer/Reject a call
To answer the call, have a short press of the MFB or use the mobile phone to answer, To reject a call, please
have two quick press on the MFB or use the mobile phone to reject.
Redial the last call
Have a long press of the volume ”, you will redial the last call.
Voice dialing
When your mobile phone supports the voice dialing function, please press the MFB a time until you hear a
beep and then say the voice tag to voice dial.To reach the best effect, please use the Bluetooth headset to
record the voice tag.
Notes: Please confirm your mobile phone has recorded the voice tag before applying the voice tag function on your
headset.
Alternate the earpiece to the mobile phone
When being under a call, have a long press of the MFB button, you will hear the voice from the mobile phone; have a
long press again, it will alternate to the earpiece.
Adjust the earphone volume
Press the volume button to adjust the volume.
Troubleshooting
If you cannot connect the headset to your phone, do as follows:
1
．
Ensure that the headset has been charged, switched on, paired with and connected to your phone.
2
．
Ensure that the Bluetooth feature is activated on your phone.
3
．
Check that the headset is within 10 meters (30 feet) of your phone and that there are no obstructions between
the headset and the phone, such as walls or other electronic devices.
4
．
If the above steps do not solve your problem, please recharge the headset. And remove your mobile phone battery for
a short time and then re-power on it.
