Oricom babysense 2 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 21

Oricom babysense 2 Скачать руководство пользователя страница 16

13

Operation

Caring for your Babysense2

Warning

Babysense2 is a high quality, high sensitivity electronic device which
must be handled with care:
• Do not handle roughly, drop or throw.
• Follow the installation instructions carefully to ensure that it is installed

securely and correctly.

• Babysense2 is not a toy. Do not allow children of any age to play with

it.

Babysense2 requires no special treatment beyond replacing batteries
when the battery indicator light illuminates. The sensor pads and remote
unit may be wiped with a damp cloth.

PRODUCT STORAGE

When you are no longer using your Babysense2 always store the product
safely to avoid damage.
Store product in a dry shaded place.
Do not place heavy objects on the sensor pads and avoid shocks.
Ensure the batteries are removed from the control unit.
If you choose to reuse the product again ensure you test the product
carefully in accordance with the user instructions.

Babysense2 is an exceedingly sensitive device and therefore

the manufacturer recommends that the sensor pads be replaced

after 2 years of use.

Made by Hisense Ltd.
ISO 9001:2008 and ISO 13485:2003 certified
23, Becker St. Rishon le Zion 75359, Israel
www.hisense.co.il

«
...
14
15
16
17
18
...
»

Содержание babysense 2






















Отзывы:

Нет отзывов