9
serviced at a ORFELD service center.
Lighting up the front lamp
1
1. Lamp
CAUTION:
Do not look in the light
or see the source of light directly.
Pull the switch trigger to light up the lamp.
The lamp keeps on lighting while the switch
trigger is being pulled.
NOTE:
Use a dry cloth to wipe the dirt
off the lens of the lamp. Be careful not to
scratch the lens of lamp, or it may lower the
illumination.
Reversing switch action
B
A
1
1. Reversing switch lever
CAUTION:
Always check the
direction of rotation before operation.
CAUTION:
Use the reversing
switch only after the tool comes to a
complete stop.
Changing the direction of
rotation before the tool stops may damage
the tool.
CAUTION:
When not operating
the tool, always set the reversing switch
lever to the neutral position.
This tool has a reversing switch to change
the direction of rotation. Depress the
reversing switch lever from the A side for
clockwise rotation or from the B side for
coun- terclockwise rotation.
When the reversing switch lever is in the
neutral posi- tion, the switch trigger cannot
be pulled.
Speed change
1
1. Speed change lever
CAUTION:
Always set the speed
change lever fully to the correct position.
If you operate the tool with the speed
change lever positioned halfway between
the "1" side and "2" side, the tool may be
damaged.
CAUTION:
Do not use the speed
change lever while the tool is running.
The tool may be damaged.
