CLEANING
Do not immerse in any liquid.
Never use abrasive cleaners, brushes,
gasoline, kerosene, glass / furniture polish or
paint thinner to clean.
Unplug the unit and allow it to cool down before
cleaning. Clean only with a soft, slightly damp
sponge. Never allows water or any other liquids to
come into contact with the unit.
•
•
Do not remove or unzip the unit cover to clean
the internal parts.
Do not attempt to repair the 3D Massage Seat
with Heat. There are no user serviceable parts.
•
4
STORING
MAINTENANCE
Place the unit in its box or in a safe, dry, cool place.
Refrain from sharp edges or pointed objects that
might cut or puncture the fabric surface. To avoid
breakage, do not wrap the power cord around the
unit. Do not hang the unit by the power cord or the
cord of the remote control unit.
TIMER
DEMO mode
Press the
TIMER
button to select
15 / 20
minutes massage time. The screen will show
countdown of the timer.
If no timer setting has been chosen the
unit shuts off automatically after approximately 15
minutes.
For a brief demonstration of the features of the 3D
Massage Seat, press and hold the
SHIATSU
and
ROLLING
buttons + together for 3 seconds.
The unit will briefly go through all the available
features of the unit. The icons on the LCD
display will flash spontaneously to indicate the
corresponding function. Once completed, the unit
turns off automatically.
NOTE
L.E.D. light will turn off.
For your safety, soothing heat cannot be
turned on if no massage program is in operation.
NOTE
HEAT MASSAGER
To initiate soothing heat, simply press the
HEAT
button and the corresponding amber L.E.D. light
on the massage nodes will illuminate. Press the
button again to deselect and the corresponding
INTENSITY
Press
INTENSITY
button to decrease or
increase the rotation speed of the unit nodes. The
display will show
HI / LO
for five seconds then
return to the countdown of the timer.
Such option is not available to
3D rolling
and
rolling
.
NOTE
WIDTH CONTROL
When entered the rolling mode, press
WIDTH
button to adjust the width between the massage
nodes. With each pressing, the massage nodes
will move to the next available position (
Narrow,
Mid or Wide
).
Width control does not work with Shiatsu
and 3D rolling.
NOTE
SPOT SHIATSU
After selected Shiatsu mode, press either
UP /
DOWN
button / to target the Shiatsu action
on one spot of you back. Adjust the mechanism
position by holding either button until the next
desired position has reached. The
UP
botton
will move the mechanism upward and the
DOWN
button will move it downward.
NOTE
Action
Shiatsu
3D Rolling
Heat
-
-
-
-
-
-
-
HI / LOW 15 mins
15 mins
Rolling
-
-
-
15 mins
Narrow,
Mid
or Wide
Roller
width
Up /
Down Intensity
Default
Timer
4.
•
•
Three massage zones to select with:
The LCD screen will display the information
accordingly.
When Shiatsu mode begins, the unit operates
specifically at the original point; when a
massage zone is selected, the unit will work
on the chosen zone with upward and
downward motions.
The unit shuts off automatically after
approximately 15 or 20 minutes.
Guide to Massage Modes and options:
Fullback
Upper back
Lower back
•
•
•
3D ROLLING
width of the rollers (
Narrow
,
Mid
or
Wide
).
Rolling can be activated concurrently with
Heat program.
Press the
3D ROLLING
button on the
remote control.
Rolling can be activated concurrently with
Heat programs.
•
•
EN
Содержание WS912
