Oregon Scientific WMR86N, Руководство пользователя, Страница: 9 / 100

7
EN
indicates the status of the clock reception signal.
IcoN MEANINg
Time is synchronized. Receiving signal is
strong
Time is not synchronized. Receiving signal
is weak
to enable (and force a signal search) / disable the
clock radio reception (clock synchronization):
1. Press SELEct to navigate to the Clock / Calendar /
Moon Phase Area. will show next to the Area.
2. Press and hold SEARcH .
appears when it is enabled.
NotE For best reception, the base station should be
placed on a flat, non-metallic surface near a window in an
upper floor of your home. The antenna should be placed
away from electrical appliances and not be moved around
when searching for a signal.
cLock / cALENdAR
to manually set the clock:
(You only need to set the clock and calendar if you have
disabled the clock radio reception).
1. Press
SELEct to navigate to the Clock Area. will
show next to the Area.
2. Press and hold ModE to change the clock setting.
The setting will blink.
3. Press / to increase / decrease the setting
value.
4. Press ModE to confirm.
5. Repeat steps 3 to 4 to set the time zone offset hour
(+ / -23 hours), 12 / 24 hour format, hour, minute,
year, date / month format, month, date and weekday
language.
NotE If you enter +1 in the time zone setting, this will
give you your regional time plus 1 hour.
If you are in the US (WMR86NA only) set the clock to:
Pacific time
Mountain time
Central time Eastern time.
NotE The weekday is available in English (E), German
(D), French (F), Italian (I), Spanish (S) or Russian (R).
to change the clock display:
1. Press SELEct to navigate to the Clock Area. will
show next to the Area.
2. Press ModE to toggle between:
• Clock with Seconds
• Clock with Weekday
• Calendar
MooN PHASE
The Calendar must be set for this feature to work (see
clock / calendar section).
New Moon Full Moon
Waxing
Crescent
Waning
Gibbous
First quarter
Third
quarter
Waxing Gibbous
Waning
Crescent
AUto ScANNINg FUNctIoN
to activate the outdoor temperature and humidity
auto-scan function:
1. Press SELEct to navigate to the Temperature or
Humidity Area. will show next to the Area.
2. Press and hold ModE to activate auto-scan. The
temperature and humidity display will scroll from
indoor to ch1 through to ch3.
3. Press any key except the LIgHt to stop the auto-scan.
NotE Channel 1 is used for the outdoor temperature
and humidity sensor. Additional temperature and humidity
sensors can use other channels.
WEAtHER FoREcASt
The weather display in the top part of the screen shows
the current weather and the weather forecast for the next
12-24 hours within a 30-50 km (19-31 mile) radius.
Weather Forecast Area
IcoN dEScRIPtIoN
Sunny
Partly cloudy
Cloudy
Rainy
Snowy
tEMPERAtURE ANd HUMIdItY
the weather station displays indoor and outdoor
readings for:
1. Temperature / relative humidity (current / maximum
/ minimum)
2. Trend line
3. Dew point level/Heat index
The weather station can connect up to 3 remote sensors.
NotE Channel 1 is dedicated for outdoor temperature
and humidity.
shows which remote sensor’s data you are viewing.
P/N:300102839-00007-10 REV1.0 Page: 9 /100